Products Category

Name: Wafer Sensor
E-mail: sales@wafer-sensor.com
Add: No.645 Sherbrooke St West Montreal. Que. H4A 3T4 Canada

Products > Meter

ES-2 Electrical Conductivity & Temperature Sensor

Product name：ES-2 Electrical Conductivity & Temperature Sensor

Item：ES-2

Details：

Complete the electrical conductivity picture

The ES-2 Electrical Conductivity Sensor is designed to measure the electrical conductivity of water in a pipe or tank. When you pair the new ES-2 with a GS3 or 5TE in the soil, you’ll begin to develop a complete picture of the salts that are going into your system, as well as the salts remaining in your soil or substrate.

Advantages

· Continuous EC measurements in a pipe or tank

· Direct measurements of pore water EC when used in conjunction with the Wetting Front Fullstop

· Check your EC values anywhere with an internet connection

Specifications

RANGE	Electrical Conductivity: 0 to 120 dS/m Temperature: -40 °C to 50 °C
RESOLUTION	Electrical Conductivity: 0.001 dS/m Temperature: 0.1 °C
ACCURACY	Electrical Conductivity: ± 0.01 dS/m or ± 10 % (whichever is greater) Temperature: ± 1 °C
OPERATING TEMPERATURE	-40 °C to 60 °C* Sensors can be used at higher temperatures under some conditions. Contact METER for more details.
POWER REQUIREMENTS	3.6 – 15 VDC, 0.03 mA quiescent, 0.5 mA during 300 ms measurement
DIMENSIONS	ES-2 Housing: 2.2 cm Diameter, 11 cm length ES-2F Housing: 1.5 cm Diameter, 9.2 cm length
THREAD REQUIREMENTS	1/2 inch NPT thread
MEASUREMENT TIME	300 ms (milliseconds)
OUTPUT	Serial TTL, 3.6 Volts Levels or SDI-12
CONNECTOR TYPES	3.5 mm (stereo) plug, or stripped & tinned lead wires (3)
CABLE LENGTH	5 m standard; custom lengths available upon request
DATA LOGGER COMPATIBILITY (NOT EXCLUSIVE)	METER EM50 Series, ProCheck, Campbell Scientific
SOFTWARE COMPATIBILITY	ECH₂O Utility (rev 1.65+), DataTrac3 (rev 3.6+)
INCLUDED	Screw-on protective cap for ES-2 use in tanks